Nemaxx M1-Mini Instrucciones De Uso Originales página 7

TROUBLE SHOOTING
Problem
Smoke alarm device does not
sound when tested.
The alarm „beeps" and the red
LED flashes once every 40
seconds.
Smoke alarm device beep
occurs every 40 seconds
(alarm goes into fault mode).
Smoke alarm device sounds
false alarms intermittently or
when residents are cooking,
taking showers, etc.
The alarm sounds different from
usual.
lt starts and stops.
EN
Method of disposal
1. Adjust the alarm onto the bracket and turn the
alarm body clockwise, until matching well on the
bracket.
2. Clean smoke alarm device.
Please refer to the „maintenance and cleaning"
section.
3. Please replace with a new alarm.
The battery is under low battery status, please
replace the smoke alarm device.
Clean smoke alarm device. Please refer to the
„maintenance and cleaning" section.
Purchase and change smoke alarm device if the
problem still exists
1. Press test button to pause alarm.
2. Clean smoke alarm device.
Please refer to the „maintenance and cleaning"
section.
3. Move smoke alarm device to new location and
press test button.
1. Clean smoke alarm device.
Please refer to the „maintenance and cleaning"
section.
2. Please replace with a new alarm.
7
Version: 5.0
20.01.2017