on automatically. After the call is completed, the radio will revert to standby mode.
7. A2DP MODE
To transfer the audio of a file played by Mobile Phone to the Car Audio Player If the mobile phone supports A2DP
and could play audio or video files, when the Mobile Phone plays an audio file(For some Mobile Phones, you must
first select Play by BT ), the playback will be transfered to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP, the functions of the >>|, |<< and
PLAY/PAUSE buttons are the same as one in media mode(no fast forward/backward functions for the >>|/|<<
buttons). The other buttons normally available in media mode are not available.
9.TROUBLE SHOOTING
NO POWER OR NO
SOUND
MUCH NOISE IN
BROADCASTS
PRESET STATION IS
RESET
USB or SD CARD IS
CONNECTING BUT NO
SOUND
All manuals and user guides at all-guides.com
The car's ignition switched off
Cable is not correctly connected.
Fuse is burnt
Station or signal is too weak.
Battery cable is not correctly
connected.
USB or SD card connection is not
good.
USB or SD car is damaged or no
music file inside.
If the power supply is properly connected to the car
accessory, switch your ignition key to ACC or ON
Check connection.
Replace the fuse.
Select other stations of stronger signal level.
Connect the battery cable to the terminal that is
always live.
Take it out and insert again.
Change to another USB or SD or record music inside
it.
18