Troubleshooting - VALBERG DHP 8 A++ W205T Instrucciones De Uso

C
Useful information

Troubleshooting

Problem
Drying operation takes too
long.
Clothes come out damp
after drying.
Cause
Fibre filter (interior and
exterior filter) pores may be
clogged.
Evaporator front side may
be clogged.
The ventilation grills in
front of the machine may be
closed.
Ventilation may be
inadequate because the are
the machine is installed in
is too small.
A lime layer may have
accumulated on the
humidity sensor.
Excessive amount of
laundry might be loaded.
Laundry might not have
been wrung adequately.
A program not suitable for
the laundry type may have
been used.
Fibre filter (interior and
exterior filter) pores may be
clogged.
Evaporator front side may
be clogged. Evaporator front
side may be clogged.
Excessive amount of
laundry might be loaded.
Laundry might not have
been wrung adequately.
28 EN
Solution
Wash the fibre filters with
warm water and dry.
Clean the front side of the
evaporator
Remove any object in front
of the ventilation grills that
blocks air.
Open the door or windows
to prevent the room
temperature from rising
very high.
Clean the humidity sensor.
Do not load the drying
machine excessively.
Perform a higher speed
wringing on the
washing machine.
Check the maintenance
labels on the clothes and
select a program suitable
for the clothes' type or use
time programs as extra.
Wash the filters with warm
water and dry.
Clean the front side of the
evaporator
Do not load the drying
machine excessively
Perform a higher speed
wringing on the washing
machine.