VALBERG DHP 8 A++ W205T Instrucciones De Uso página 14

B
Connecting to the drain
You can directly drain accumulated water through the water drain hose supplied with the product
instead of periodically draining the water collected in the water tank.
Connecting the water drain hose
1 2
Pull hose at the behind of the dryer by hand in order to disconnect it from where it is
connected. Do not use any tools to remove the hose.
3
Connect one end of the drain hose supplied with the dryer to the connection point from where
you removed the hose of the product in previous step.
4
Connect the other end of the drain hose directly to the wastewater drain or to the washbasin.
NOTE:
• Water drain hose should be attached to a height of maximum 80 cm.
• Make sure that the water drain hose is not stepped on and it is not folded between the drain
and the machine.
• If there is an accessories pack supplied with your product, please see the detailed
description.
Adjusting the feet
Turn the feet to left or right until the dryer stands level and firmly.
Using the appliance
1
3
2
4
7 EN