PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION
LEAVE A COPY FOR THE USER/MAINTENANCE ENGINEER FOR FUTURE REFERENCE
We recommend this fitting is installed by a qualified Electrician
CONTROLLER
OPERATING THE RGBW FLOODLIGHT
The LED Floodlight has been pre-set to colour White.
ON/OFF BUTTON
2
Batteries required:
2pcs AAA (Not Supplied).
3
1
RGBW Remote Control INSTRUCTION
PLEASE NOTE: This RGBW floodlight is supplied complete with an
RGBW remote controller. The controller has been paired for use with
the RGBW floodlight. If for whatever reason the RGBW floodlight and
remote control are not paired, please follow the steps below.
TO PAIR
In order to initiate the pairing process between the remote control
and floodlight, switch off and quickly switch back on the power
supply to the RGB Floodlight.
Press and hold the ON/OFF button of the controller for 3 seconds.
The RGB floodlight will flash 3 times to register the remote controller.
The RGB floodlight is now paired with the controller.
TO UNPAIR
In order to initiate the unpairing process for the remote control and
the floodlight, switch off and quickly switch back on the power supply
to the RGBW Floodlight.
Press and hold the ON/OFF button of the controller for 3 seconds.
The RGBW floodlight will flash 6 times to register the floodlight is now
unlinked to the remote controller.
The RGBW remote will no longer be paired to the RGBW floodlight.
MEMORY
Once you have selected your chosen colour, press and hold the
MEMORY button for 3 seconds and the floodlight will store the setting.
The floodlight will flash once to indicate storage is complete.
If you use the remote to change the floodlight to other colours,
simply press this MEMORY button once to quickly return to your
pre-programmed set colour.
MULTI-COLOUR SELECT
When the floodlight is switched on, sweep your finger around the
colour selector to choose your desired colour.
DIMMING
Sweep finger from Left to Right to increase brightness or Right to
Left to decrease.
1. M = MODE OF OPERATION:
FIRST press for RED Fade
SECOND press for GREEN Fade
THIRD press for BLUE Fade
FOURTH press WHITE Fade
FIFTH press Fade: RED > Green > Blue > White
SIXTH press Strobe: RED > Green > Blue > White
SEVENTH press MULTI-COLOUR Fade: Multi-colour
EIGHTH press (return to FIRST)
PLEASE NOTE: The Mode Of Operations are designed for singular
floodlight use, multiple floodlights may not be in sync.
Once a mode of operation has been selected the fade or strobe
speed can be increased or decreased.
2. S- Slow operation. 5 speeds available:
100ms (Fastest) to 3s (Slowest)
3. S+ Speed up operation. 5 speeds available:
100ms (Fastest) to 3s (Slowest)
SINGLE COLOUR SELECT Select a preferred static colour.
PRECISION PLUS Floodlight
ILFLD331
50-41-46
Version A - 24/08/2021
ILFLD336
77-92-39
