Comelit RF2PIRAMW Manual De Instrucciones página 4

•
Open the detector by unscrewing the locking screws A and B, position the base of the detector in the middle of upper
jamb of window or door to protect and mark the position of fixing holes on the wall. Drill the two holes by using a bit of Ø 5
mm and insert the two dowels included in the package.
A
RADIO
TRANSMITTER
•
Place the base of the detector to the wall and proceed with the wiring terminal block and the dip switch settings according
to the following schemes:
Connections:
J1
Setting dip-switch:
ON
DIP 1
OFF
ON
DIP 2
OFF
ON
DIP 3
OFF
ON
DIP 4
OFF
ON
DIP 5
OFF
DIP 1
Recommended
setting
ON
FEATURES
POWER SUPPLY
CURRENT ABSORPTION
PULSE COUNT
LENS TYPE
MAXIMUM PIR RANGE
RADIO RANGE
ANTIOPENING
TEMPERATURE COMPENSATION
OPERATING TEMPERATURE
HUMIDITY
DIMENSIONS LXHXD
WEIGHT
GRADE OF PROTECTION
PICTURE 1
PICTURE 2
HOLES FOR FIXING BASE
Positive transmitter power supply
Negative transmitter power supply
Allarm
Allarm
Tamper / Antimask
Tamper / Antimask
active power supply
non-active power supply
anti-blinding non active
anti-blinding active
LED on
LED off
sensor in OR
sensor in AND
single impulse
double impulse
DIP 2 DIP 3 DIP 4
OFF OFF OFF
one 3.6 VDC Lithium battery
rest condition 20 µA – alarm condition 1mA
1 or 2 pulses in 2.5s
fresnel
Max 4 m
Max 500 m in open space
internal contact
automatic
-20°C a +50°C
85% (max)
280 x 38 x 30 mm
190 gr
IP54
LED
DIP 5
OFF
B