swiss pro Retro Manual De Usuario página 4

24. Always make sure the lid is closed and do not pick it up when the water is
boils. Burns may occur if the lid is removed during the cooking cycle.
NOTE: Do not remove the lid when the water is boiling. The lid should be
positioned so that the steam is directed away from the handle.
25. This device is intended for home use as well as for similar applications
such as:
- In the kitchen reserved for employees in shops, offices and other workplaces;
- Houses;
- By guests in hotels, motels and other similar places offering accommodation;
- Bed & breakfast accommodations;
HOW TO USE
1. Open the kettle(Fig.1), pour in the water(Fig.2) and close the lid. In order to
avoid burns wait a moment after boiling. The water should not be below the
minimum level indication or above the maximum level indication.
2. Insert the plug into the socket(Fig.3), place the kettle on the base(Fig.4) and
switch on the appliance with the switch(Fig.5). Remember: Do not switch on
the kettle before placing it on the base.
3. The kettle switches off automatically after boiling.
4. Wait for the water to stop boiling before pouring the water out of the kettle.
5. If the kettle switches off automatically before the water boils, this means that
the excess stone in the kettle needs to be removed.
6. Fill the kettle with water to the maximum level and empty it after boiling.
Repeat this step and clean the kettle to remove the resulting odor.
STORAGE
1. To store the power cord, wrap it around the reel under the base.(Fig.6)
CLEANING
1. Before cleaning, please disconnect the appliance from the mains by
removing the plug from the socket and let the appliance cool down.
2. Do not immerse the kettle, power cord, plug or outlet in the water.
3. Make sure the wire of the electronic circuit is dry.
4. Wipe the body of the kettle with a damp cloth. Do not use scouring powder
or cleaning agents as these can damage the surface of the kettle.
5. Remove the scale filter from the kettle and clean it carefully with a soft nylon
brush under a running tap.(Fig.7)
DESCALING
1. Use a product intended for descaling, follow the instructions of the intended
product.
2. Pour 0.5 liters of white vinegar 8% into the kettle, let it stand for an hour,
then pour out the vinegar and rinse the kettle 4 to 5 times with clean water.
3. Pour more than 0.5 liters of water into the kettle, sprinkle with 25 grams of
citric acid, let it stand for 15 minutes and finally rinse 4 to 5 times with clean
water.
4