MESTO Tessior 3555B Instrucciones De Uso Originales página 22

IRL
4. Now your application device is ready for use. Depending on the size of the interfaces to
be treated switch between the available spraying modes D1 to D4 (DOSE) by moving the
selector switch [20] on the operating unit [8] upwards or downwards
A brief spray is output each time the switch [21] on the spray gun [4] is operated. Please
refer to Table 2 for the applied quantity of liquid as a function of the spray mode set.
Spray mode
MODE: D1
MODE: D2
MODE: D3
MODE: D4
+
+
+
5. Your dosing system comes with an integrated counter for documentation of the number
of sprays applied. To display the number of sprays on the display of the operating unit
[8], turn the selector switch [20] to the right or left
The "USER: 12345678" display indicates the entire number of sprays you applied with
your device. Repeated operation of the selector switch [20] will display the number of
sprays in the respective spray mode
+
6. Recharge the battery [9] when necessary as described in section "Preparation". The
battery is charging when the indicator light [15] on the charger [10] lights up red. Full
charging requires approx. 4 hours. Charging is complete as soon as the indicator light
[15] on the charger [10] lights up green
AUS
.
USA NZ
Applied quantity of liquid in ml
per switch operation
0.15
0.20
0.25
0.30
®
.
.
.
22
CDN IND
.