Radio Operation; Aux-In Operation - Akai AB-40K SCORPIO Manual De Instrucciones

The unit is designed to receive FM Stereo / FM and AM radio bands.
1. Slide the FUNCTION switch on the side of the unit to select RADIO mode.
2. Slide the BAND switch on the side of the unit to select FM ST , FM or AM band.
3. Adjust the TUNING knob on the side of unit to tune the frequency of desired radio station.
4. The tuning frequency will be displayed on the LCD display.
5. For the FM stereo mode, please slide the BAND switch to FM ST position. The FM ST. indicator will be
lighted up when the reception signal is strong.
6. For the FM mono mode, please slide the BAND switch to FM position. The FM ST. indicator will be
turned off.
7. For the AM mode, please slide the BAND switch to AM position.
Remark:
The unit has built-in AM ferrite bar antenna, which can provide adequate reception in most
areas. If the AM reception is weak, try to adjust the location of the unit or relocate the unit
to improve the reception. If the FM reception is weak, try to adjust the length and the angle
of the FM antenna to improve the signal reception.
Setting up (AUX-IN) connection
AUX-IN jack will allow you to connect external music player or external sound source to the main unit.
1. Plug into a 3.5mm audio cable (not included) into your external music player and connect the other
end (3.5mm jack) into the AUX- IN jack on the side of the unit.
2. Make sure your external music player is turned on.
Slide the FUNCTION switch to CD/USB/AUX position on the unit.
3.
4. Start music playback on your external music player.
5. Adjust VOLUME knob to control the sound level of music playback from the speakers on the unit.
All manuals and user guides at all-guides.com

RADIO OPERATION

AUX-IN OPERATION

21
TO DEVICE PHONES
OR AUX OUT(LINE OUT)