Manual Focus Adjustment - Blackmagic Studio Camera Manual Del Usuario

Using ATEM Software Control
21
The iris/pedestal control illuminates red
when its respective camera is on air.
Click on the auto focus button or drag the manual focus
adjustment left or right to focus a compatible lens.
Iris/Pedestal Control
The iris/pedestal control is located within the cross hairs of each camera controller. The control illuminates
red when its camera is on air.
To open or close the iris, drag the control up or down. Holding the shift key allows only iris adjustments.
To darken or lift the pedestal, drag the control left or right. Holding the command key on a Mac, or the
Control key on Windows, allows only pedestal adjustments.
Coarse Setting
The coarse setting is located to the left of the iris/pedestal control and is used to limit the iris range. This
feature helps you prevent over exposed images from going to air.
To set your coarse threshold, completely open the iris using the iris control, then drag the coarse setting
up or down to set optimum exposure. Now when you adjust the iris, the coarse threshold will prevent it
from going above optimum exposure.
Iris Indicator
The iris indicator is located to the right of the iris/pedestal control and displays a visual reference
so you can easily see how open or closed the lens aperture is. The iris indicator is affected by the
coarse setting.
Auto Focus Button
The auto focus button is located at the bottom left corner of each camera controller. Press to automatically
set the focus when you have an active lens that supports electronic focus adjustments. It's important to
know that while most lenses support electronic focus, some lenses can be set to manual or auto focus
modes, and so you need to ensure your lens is set to auto focus mode. Sometimes this is set by sliding
the focus ring on the lens forward or backward.

Manual Focus Adjustment

When you want to adjust the focus on your camera manually, you can use the focus adjustment located
at the bottom of each camera controller. Drag the wheel control left or right to manually adjust focus
while viewing the video feed from the camera to ensure your image is nice and sharp.