Oce CS6407 Guía De Consulta Rápida página 25

5
Open the front cover and then open the cap
cover.
O P E N C O V E R
C L E A N C A P
6
Soak the cleaning roller in the cap cleaning
liquid.
Note
- Do not soak the cleaning roller that once cleaned the cap in
the cap cleaning liquid bottle. The cap cleaning liquid will be
contaminated.
7
Clean the top surface of the cap by rolling the
cleaning roller.
1.
Roll the roller back and forth on each cap.
2.
Then roll the roller back and forth 10 times on each
cap.
Note
- The cleaning roller is intended for a single use only. Use a
new cleaning roller for each cleaning.
8
Close the cap cover and the front cover.
The print head returns automatically to the home
position.
All manuals and user guides at all-guides.com
<Replenishing spittoon absorber liquid>
1
2
3
<Checking the waste ink bottle>
Note
- Do not leave the print head away from the capping unit
unnecessarily. The print head dries, which may result in a
malfunction.
- If nozzle-out still occurs even after the above cleaning is
performed, remove foreign matters and ink stains on the cap
with a cleaning swab dampened with cap cleaning liquid
while checking visually.
- Be careful so that the cap cleaning liquid does not adhere to
any part other than the cap.
Open the front cover, and then open the cap
cover.
Check the spittoon absorber liquid level in the
spittoon unit visually.
If the liquid level has become so low that the boss for
liquid quantity measurement is visible, refi ll the spittoon
absorber liquid up to the same level as the top of the
boss.
Spittoon unit
Close the cap cover and the front cover.
Check whether the waste ink bottle is full. When it is full,
dispose of the waste ink in an appropriate container to clear
out the waste ink bottle.
Liquid level
top of the boss
25