KTM Power Parts 79011955044 Instrucciones De Montaje página 8

8
All manuals and user guides at all-guides.com
- Pull starter relay
- Remove original holding bracket
- Unplug socket connector
- Pull control unit
- Remove diagnostics connector
- Remove the cable ties.
- Pull rollover sensor
- Disconnect socket connector
- Remove the cable ties from plug-in connector
- Pull relay
- Slip all the cables out at the top and hang the wiring harness to the
side.
- Remove screws
- Remove screw
- Remove the original battery compartment.
out of holding bracket
.
.
out of the bracket.
and take off control unit.
out of the bracket and hang to the side.
.
with rubber from the bracket.
.
.
.
.