Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Display
Residual heat indicator
Warning!
Risk of burns from residual heat!
Operating instructions
On and Off
Touch
for 1 second to start or stop the appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch
to increase the heat setting. Touch
crease the heat setting. The display shows the heat set-
ting. Touch
and
at the same time to switch off
the cooking zone.
Switching the outer ring on and off
You can match the effective heating surface to the size
of the cookware.
Helpful hints and tips
Cookware
• The bottom of the cookware must be as thick
and flat as possible.
• Cookware made of enamelled steel and with alumini-
um or copper bottoms can cause discoloration on
glass ceramic surface.
Energy saving
• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you
start it.
All manuals and user guides at all-guides.com
The automatic switch off is active
.
-
6 hours
5 hours
to de-
Description
• you do not set the heat setting after you start the hob.
• you cover a sensor field with an object (a pan, a
cloth, etc.) for longer than 10 seconds. Remove the
object or clean the control panel.
• you do not stop a cooking zone or change the heat
setting after some time. See the table.
-
4 hours
To switch on the outer ring touch the sensor field
The indicator comes on.
To switch off the outer ring touch the sensor field
again. The indicator goes out.
• Stop the cooking zones before the end of the cooking
time to use residual heat.
• The bottom of pans and cooking zones must have
the same dimension.
Examples of cooking applications
The data in the table is for guidance only.
comes on.
-
1.5 hours
.
7
Capítulos
Tabla de contenido
