Safety Instructions - Auping K2 77 Manual De Instrucciones

All manuals and user guides at all-guides.com

2. Safety instructions

The K2 mesh base must only be
fitted and
electricity supply by an Auping
specialist.
The K2 mesh base is only suitable
for use in the home.
The mesh base has a power-off
switch which switches off the
electricity supply from the mains
when no power is demanded. The
power-off switch is in the plug.
When you press one of the control
buttons, the
automatically turns the power on.
The green light on the plug indicates
that power is being used.
The K2 mesh base operates on 24
V low-voltage current.
Check that the voltage of the
transformer is the same as the
mains voltage in the house.
Adjustable beds have moving parts.
Make sure that your limbs cannot
become trapped.
Only adjust the bed while you are
lying on it. Make sure that no
children are under the bed while it is
being adjusted.
GB4
connected to
power-off switch
The mesh base is not a toy. Do not
the allow children to play with the bed.
Do not use the bed as a trampoline
or stepladder.
Disconnect the bed from the power
supply before cleaning. Pull the plug
out of the socket.
Use an Auping K2 mesh base in
combination
mattress.
Only place the bed in a dry room. In
view of the electrical components it
is not permitted to place the bed in
a damp room.
Make sure that the cables cannot
become trapped. Check this by
adjusting the bed after it has been
installed.
Remove the plug from the socket
during a thunderstorm.
with an Auping