Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Annex - Inspection of 100 hours
Part 1
SERIAL NUMBER
(over 600 hours, print more of these pagesat
www.portablewinch.com)
Date
Hour meter reading(yes / no)
GEARBOX
Warning labels present and legible
Any leaks found
Gearbox oil level is OK
All screws and bolts are tight
Anchor hooks - no cracks, clasp is working
Shaft end-play less than 0.5 mm (0.020'')
Drum keyway is tight
Capstan shaft & seal area are clean
Rope entry pulley (brass pulley) rotating,
no flat section
Cracks in housing found
ROPEGRABBING SYSTEM/WINCH
CONTROLS
Main plate pivots freely
Pivot bolt is tight
No excessive wear on pivoting parts
Throttle control operational
CLUTCH
(PCH1000 / PCH2000 ONLY)
Clutch rotor is tight, no cracks or uneven
wear
Clutch drum is tight, turns freely, wall is >2
mm
MOTOR
(PCH1000 / PCH2000 ONLY)
Spark plug is clean with proper gap
Idle speed is adjusted
Valve clearance within specs
Fuel tank/filter are clean
Spark arrestor is clean
Oil is new and level is good
Air filter is clean
ROPES,HOOKS, LINKS
Rope is in good condition - whole length
Rope termination is not damaged
Hooks are in good condition
Links (shackles, carabiners, etc.) are good
INSPECTION
#1
INITIALE
#2
#3
#4
EN
S / N:
____________________
#5
#6
18
Tabla de contenido
