Wine Cooler Installation; Limitations; Dimensions - Haier HVB050ABH Manual Del Usuario

All manuals and user guides at all-guides.com
HVB050ABH manual 8/29/02
Wine Cooler Installations
Install Limitations
• Do not install your wine cooler in any location not properly insulated or
heated e.g. garage etc. Your wine cooler was not designed to operate
in temperature settings below 55˚ Fahrenheit.
• Select a suitable location for the wine cooler on a hard even
surface away from direct sunlight or heat source e.g. radiators,
baseboard heaters, cooking appliances etc. Any floor unevenness
should be corrected with the leveling legs located on the front and rear
bottom corners of the wine cooler.

Dimensions

• Built-in wine coolers need to be ventilated from the front. This feature
allows the unit to be built in an enclosed area. The bottom front grille
should be clear of all obstructions. This is absolutely necessary for the
air to circulate and for the unit to operate efficiently. The dimensions for
installation are as follows. (W x D x H)
Unit Dimensions: 23
Built-In Dimensions: 24
8:38 AM Page 10
7 /8 3 /4
x 23 x 34
1 /8 5 /8
x 23
English
11 /16
3 /16
x 35
8