Mounting; Orientation; Rigging; Mounting Diagram - Chauvet DJ Beamer 6 FX Manual Del Usuario

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the
Safety
(such as CLP-15 from Chauvet) is capable of supporting the weight of the product. For our
Chauvet line of mounting clamps, go to www.chauvetlighting.com/cables-clamps-main.html.
The Beamer 6 FX must be mounted in a position that includes planning for safe laser usage. In

Orientation

addition, make sure adequate ventilation is provided around the product.
· Before deciding on a location for the product, always make sure there is easy access to the

Rigging

· Make sure that the structure or surface onto which you are mounting the product can support
· When mounting the product overhead, always use a safety cable (such as CH-05 from
· When rigging the product onto a truss, you should use a mounting clamp of appropriate
· The bracket adjustment knobs allow for directional adjustment when aiming the product to

Mounting Diagram

Beamer 6 FX User Manual Rev. 3
All manuals and user guides at all-guides.com
Notes. Use at least one mounting point per product. Make sure the mounting clamp
product for maintenance and programming.
the product's weight (see
Chauvet). Mount the product securely to a rigging point, such as an elevated platform or a
truss.
weight capacity. The bracket has a 13-mm hole, which is appropriate for this purpose.
the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could
damage the knobs.
Mounting Clamp
Mounting Bracket
Technical Specifications).
Safety Cable
Bracket Adjustment
Knob x2
Page 17 of 112