Mellerware Slurpy! Manual Del Usuario página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
Do not cover the cooking surface
or food with aluminium foil and
other similar materials.
Do not cover or wrap the food
with aluminium foil and other
similar materials.
To keep the non-stick treatment in
good condition, do not use metal
or pointed utensils on it.
Disconnect the appliance from the
mains when not in use and before
undertaking any cleaning task.
Store this appliance out of reach of
children and/or persons with physical,
sensory or reduced mental or lack of
experience and knowledge.
Do not store the appliance if it is
still hot.
Turn the thermostat control to the
minimum (MIN) setting. This does
not mean that the appliance is
Service
Any misuse or failure to follow the
instructions for use renders the
guarantee and the manufacturer's
liability null and void.
Description
A – Non-stick plate
B – Thermostat button
C – Pilot light
D – Base
E – Wooden spreader
If the model of your appliance does
not have the accessories described
above, they can also be bought
separately from the Technical
Assistance Service.
Instructions for use
BEFORE USE
Make sure that all the product's
packaging has been removed.
time, clean the parts that will come
into contact with food in the manner
described in the cleaning section.
Some parts of the appliance
have been lightly greased.
appliance is used a light smoke
may be detected. After a short
time, this smoke will disappear.
the appliance when used for the
have it on at full power for 2 hours
in a well-ventilated room.
USE
Extend the cable completely
before plugging it in.
Connect the appliance to
the mains.
some oil or grease to the plate.
Turn the thermostat control to the
desired temperature position.
The pilot light (C) will lightup red.
When the appliance is ready to use,
the pilot light (C) will turn off.
During the appliance's use the
pilot light (C) will turn on and off
automatically, indicating the heating
EN
ES
Tabla de contenido
loading

Tabla de contenido