Fcc Statement; Year Warranty - Cooper Lighting RL56 Manual Del Usuario

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
•
(1) This device may not cause harmful interference.
•
(2) This device must accept any interference received, including interference that may cause undesired operation.
•
The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the
N ote:
user's authority to operate the equipment.
N ote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
•
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help
•
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
•
distance of 20 cm between the radiator and your body.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s).
•
Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that
may cause undesired operation of the device.
This device complies with ISED ICES Standard Canada ICES-005(B) / NMB-005 (B)
•
IC 20cm RF
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
•
distance of 20 cm between the radiator and your body.
This device complies with industry Canada license-exempt RSS-247 standard(s).
•
This equipment complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
•
minimum distance of 20 cm between the radiator and your body.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
•
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: - (1) This device may not cause interference; and
•
- (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC ID - 2AKCY-RL56BBLE
IC Code - 4706A-RL56BBLE
SAVE THESE INSTRUCTIONS AND WARNINGS.
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING,
BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for a period of FIVE years from the date of purchase, Cooper Lighting Solutions products will be free
from defects in materials and workmanship. The obligation of Cooper Lighting Solutions under this warranty is expressly limited to the provision of replacement
products. This warranty is extended only to the original purchaser of the product. A purchaser's receipt or other proof of date of original purchase acceptable to
Cooper Lighting Solutions. This is required before warranty performance shall be rendered.
This warranty does not apply to Cooper Lighting Solutions products that have been altered or repaired or that have been subjected to neglect, abuse, misuse
or accident (including shipping damages). This warranty does not apply to products not manufactured by Cooper Lighting Solutions which have been supplied,
installed, and/or used in conjunction with Cooper Lighting Solutions products. Damage to the product caused by replacement bulbs or corrosion or discoloration
of brass components are not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL Cooper Lighting Solutions BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF
THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS; NOR SHALL THE
LIABILITY OF Cooper Lighting Solutions FOR ANY CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE MANUFACTURE,
SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF Cooper Lighting Solutions PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS
THEREFORE, EXCEED THE PURCHASE PRICE OF Cooper Lighting Solutions PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED
TO REMOVE OR INSTALL FIXTURES.
All returned products must be accompanied by a Return Goods Authorization Number issued by the Company and must be returned freight prepaid. Any product
received without a Return Goods Authorization Number from the Company will be refused.
Cooper Lighting Solutions is not responsible for merchandise damaged in transit. Repaired or replaced products shall be subject to the terms of this warranty and
are inspected when packed. Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed
with them. Do not use with any other manufacturer's dimmers.
Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited.
Before proceeding, confirm your recessed housing is compatible with RL56 LED Retrofit Modules. A list of the most common housings is provided below. Along with those
noted below the RL56 LED Retrofit Modules are UL Certified for use with any 5" or 6" diameter recessed housing constructed of steel or aluminum with an internal volume
that exceeds 108 in. and does not exceed the input rating of the housing.
3
HALO : H7ICAT, H7ICT, H7T, H7ICATNB,
• ®
H7ICTNB, H7TNB, H7UICAT, H7UICT, H7TCP ,
•
H7RICAT, H7RICT, H7RT, H27ICAT, H27ICT,
•
H27T, H27RICAT, H27RICT, H27RT, E27ICAT,
•
E27RICAT, E27RTAT, E27TAT, E7ICAT, E7ICATNB,
•
E7RICAT, E7RTAT, E7TAT, E7TATNB, H5ICAT,
•
H5RICAT, H5T, H5RT, H5TM, H25ICAT, E5ICAT,
•
E5ICATNB, E5RICAT, E5RTAT, E5TAT, E5TATNB
•
FCC STATEMENT

5-YEAR WARRANTY

NON-SCREWBASED LED LUMINAIRES
HALO LED: H750ICAT*, H750RICAT*, H750T,
• ®
H750TCP , H2750ICAT, H550ICAT*, H550RICAT*,
•
E550ICAT, E550RICAT, E750ICAT, E750RICAT,
•
H750FR2ICAT*, H550FR2ICAT*
•
HALO LED Retrofit: ML7BXRFK, ML7E26RFK
• ®
Juno: IC22, IC22R, IC22W, IC22S, IC23, IC23W,
•
IC21, IC21R, IC2, TC2, TC2R, IC20, IC20R, IC25,
•
IC25R, IC25W, IC25S, TC20, TC20R
•
Capri: CR1, PR1, QL1, R9ASIC
•
Lithonia: L7X, L7XP
•
Thomas: PS1, R9ASIC/PS9RM
•
Prescolite: IBXS
•
Commercial Electric: C7ICA (H3), H18
•
Elco: (HL7ICA) EL7ICA
•