Idiomas disponibles
Idiomas disponibles
Instructions for use Multiplex Trio drain / overflow Visign MT3 / MT5
GB
Bestimmungsgemäße Verwendung
Intended use
Multiplex Trio is a combined inlet, drain and overflow unit for bathtubs with a 52-mm
dieser Text....
Q
Q
drain hole. It meets the requirements of DIN EN 274. It is exclusively designed for
household wastewater with a short-term temperature of 95°C.
Introducing other liquids such as cleaning agents that could damage sanitary
equipment, drain parts and pipe materials, especially those with a pH value of less
than 4, is not permitted. Installation must only be performed by specialist companies
in compliance with local building code.
Drainage capacity: 0.87 l/s at 300 mm accumulation height
Overflow capacity: 0.63 l/s at 60 mm accumulation height over the middle overflow
hole
Caution: Safeguard drinking water from contamination.
To prevent contamination of drinking water caused by bath water flowing back
into the drinking water system, a pipe interrupter must be installed between the
concealed shut-off fitting and the bathtub inlet. Local standards and regulations
must be observed.
This instruction manual should be given to the building owner after assembly.
35
