Now you are ready to use your water dispenser.
ATTENTION:
If you do not plan to use the water heating function for more than two or three days, we
recommend that you turn off the hot water function.
WARNING
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL
SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED
PRODUCTS SERVICE CENTER.
OPERATING YOUR WATER DISPENSER
Electrical Connection
This appliance should be properly grounded for your safety. The power cord of this appliance is
equipped with a three-prong plug which mates with standard three prong wall outlets to minimize
the possibility of electrical shock.
Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not, under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Product Service Center.
This appliance requires a standard 120 Volts A.C. / 60Hz electrical outlet with three-prong ground.
The cord should be secured behind the appliance and not left exposed or dangling to prevent
accidental injury.
Do not use an adapter plug with this appliance.
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified
electrician or service technician install an outlet near the appliance.
Steps To Replace Water Bottle
Use a clean cloth to wipe off neck of bottle.
Remove cap, if there is one on.
Insert the water bottle on the water intake over reservoir opening so it settles properly on it.
Wipe off any water, which may have splashed on dispenser top.
Note: The hot water faucet has a child safety guard attachment
All manuals and user guides at all-guides.com
4