Lenco DIR-270WD Manual De Usuario página 24

CD PLAYER
Select 'CD' on the main display screen by turning the dial and pressing the navigation wheel (8) or with
the remote navigation buttons.
The display screen for the CD function will now show "Reading..." followed by "No Disc".
Select the Eject Disc (15) CD function on the radio or the remote. Insert your CD slightly and the drive
will take the CD into the system to play.
The first song on the CD will now begin to play and album artwork will display on the screen. Please
note that not all CDs will display album artwork.
CD Functions
To skip between songs, use the '<' (2) or '>' (5) buttons on the remote. Pause/Play(3) using the button
on the radio or remote.
To skip rewind/forward through a song playing, press and hold the '<<' (9) or '>>' (11) buttons and
release when you will to stop skipping.
To eject the CD, press the Open/Close CD function on the radio or on the remote, as per the guidance
to enter the CD.
Press the 'Stop' (10) button to stop the album. This will also display how many songs are on the album
and total playing time. Press 'Play/Pause' (12) to begin listening again.
Arrange a CD song program
1. When the CD is put into 'Stop' (10), you can program the CD player to play songs in a particular
order. Simply follow by pressing the "Program" (17) button on the remote to step into the state
of programming.
2. Once in program settings, the display will show P1 001 to display the first song on the CD as 001.
You can now choose what song you would like as program number 001 by using the '<' (2) and '>'
(5) buttons to scroll through to the song you would like to choose. Once on the chosen song for
001, press the 'Program' (17) button to select, and be taken to choose your next programmed
song.
3. For the next song, the display will show P2 002 to show the program 2. Now use the '<' (2) and '>'
(5) buttons to scroll through to the song you would like to choose. Once on the chosen song for
24