For continuous measurement activate the laser
(see figure) and keep the button pressed.
4
Mode selection
The device features various measuring modes.
ON
1. Ambient
temperature mode
4. Thermal bridge mode
7. Average infrared
temperature
See Section 5 for selecting dry-bulb temperature and wet-bulb temperature modes.
!
With a temperature sensor (K-type) connected, contact temperature mode is automatically
added to the mode selection.
CondenseSpot XP
Release the button as soon as the target
laser pinpoints the measurement location.
The measured value is held.
2. Humidity mode
5. Maximum infrared
temperature
8. Infrared temperature
difference (Max / Min)
3. Dew point mode
6. Minimum infrared
temperature
17
EN