Water Connection; Safety Devices - EDM Product 08681 Manual De Instrucciones

WATER CONNECTION

• Connection to the public network according to regulations.
ES
• The inlet hose can be connected to the water network with a
maximum inlet pressure of 10 bar. In Europe, this high-pressure
washer can only be connected to the drinking water network,
PT
when a suitable mains non-return device, type BA according to EN
1717, has been installed. The length of the hose between the non-
return device and the water washing machine High pressure must
measure at least 10 meters to absorb possible pressure spikes
(minimum diameter of 1⁄2 inch).
EN
FR
• The suction operation (eg from a rainwater container) is carried
out without a non-return device. As soon as the water flows
through the BA valve, this water is no longer considered potable.
IMPORTANT !: Only use water without impurities. If there
is a risk of sand particles in the inlet water (i.e. from your
own well), an additional filter must be fitted.

SAFETY DEVICES

• The relief valve can reduce the pressure if it exceeds the preset
values. Trigger Gun Locking Device: The trigger gun features a
locking device. When the knob is activated, the trigger gun cannot
be operated.
THERMAL SENSOR
• A thermal sensor protects the motor against overloads. The
machine will restart after a few minutes when the thermal sensor
has cooled down.
ESPECIFICACIONES DEL PRODUCTO
Voltage: 220-240V
Frequency: 50/60Hz
Watts: 1800W
Protection class: IPX5
Nominal pressure: 10MPa
Allowed pressure: 15MPa
Nominal flow: 6l/min
Peak flow: 7.2l/min
Maximum inlet pressure: 0.7 Mpa
Instruction manual
08681
REF.