Disconnect The Spark Plug; Items Required For Assembly; Assembly Of The Handle - MADER TZ51SF-BS625EXi Manual De Instrucciones

1
1: Spark plug wrench
2: Cable clips
3: Grass catch bag and its metal frame
4: Mulching plug
5: Side discharge deflector
B- Disconnect the spark plug
Before assembling your lawnmower, disconnect the spark plug wire from the spark plug and ground it to
the engine by attaching the rubber boot or metal clip to the grounding post on the engine.

C- Items required for assembly
Pliers (may be useful)
0.47 Litre Oil

Fresh Petrol


fuelled as detailed in this manual before starting the engine.
IMPORTANT –
NOTE – Reference to right hand or left-hand side of the mower is observed from the rear of the
machine (operating position)
D- Assembly of the handle
Nip together the lower handle against the mounting bracket (using pliers).
Connect the lower handle, right bracket and left bracket with two knob nuts and two square neck bolts.

Lift the upper handle and align it with the lower handle. Tighten knob nuts or the quick lock handle to the

upper handle.

Attach the control cables to the handle with cable ties and attach the recoil starter to the rope guide on the
upper handle

2
This lawnmower is shipped without fuel and oil. Ensure machine is oiled and
3 4 5
10