Siderest With Locking Mechanism, Height Adjustable, Flip-Back; Side Rest, Stepless Height Adjustable, Non-Locking - Küschal ULTRA-LIGHT Manual Del Usuario

Adjusting the height
1. Tip the lever A on the front of the support and move
the armrest upwards or downwards until you reach
the desired height.
2. Engage the lever.
3. Perform the setting on both sides.
CAUTION!
This siderest does not engage into the
wheelchair.
– Therefore do not hold it in order to lift the
wheelchair.
3.8 Siderest with locking mechanism, height
adjustable, flip-back
Folding
1. Push the grey grip A and fold the siderest back.
1583566-D
Removing
1. Fold the siderest back and pull it up out of the holder
on the back.
Fitting
1. Insert the siderest from above into the holder on the
back.
2. Fold it downwards.
Adjusting the height
1. Release the bolt in the middle of the seat back using a
spanner.
2. Move the armrest upwards or downwards until you
reach the desired height.
3. Tighten the screw.
4. Perform the setting on both sides.
3.9 Side rest, stepless height adjustable,
non-locking
Components and their functions
17