Fitting The Cuff; Measuring Procedure - ReliOn BP200W Manual De Instrucciones

5.3. Fitting the cuff

a) Remove all objects and jewelry (e.g., wrist-
watch) from the wrist in use. Put the cuff
over the wrist with the monitor face on the
inside of the wrist.
b) The distance between the cuff and the
hand should be approx. 10 mm (1/2").
c) Secure the cuff with the hook and loop fas-
tener so that it lies comfortably and not
too tight. No space should remain between
the cuff and the wrist.
d) Support the arm with a small cushion so
that the cuff rests at about the same
height as the heart. Remain still for 2 min-
utes before beginning the measurement.

5.4. Measuring procedure

After the cuff has been appropriately posi-
tioned the measurement can begin:
a) Press the ON/OFF button to begin. After
pressing the ON/OFF button you will hear a
series of short beeps and the pump begins to
inflate the cuff. On the display, the increas-
ing cuff pressure is continually shown.
b) After reaching the proper inflation pres-
sure, the pump stops and the pressure
slowly falls. The cuff pressure is displayed
during the measurement. When the device
has detected the pulse, the heart symbol in
the display begins to blink.
10
All manuals and user guides at all-guides.com
0.5 - 1.0 cm
(¼" - ½")
Pulse Detected -
Unit measuring