Cleaning Lock; Automatic Time Limitation; Basic Settings - NEFF T4 D 3 Serie Instrucciones De Uso

Cleaning lock

Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the " symbol. A beep sounds. The control panel is
locked for approximately 35 seconds. The surface of the
control panel can now be cleaned without risk of changing the
settings.
Note: The lock does not affect the
The hob may be switched off when desired.

Automatic time limitation

If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.

Basic settings

The device has several basic settings. The settings can be
adapted to the user's own needs.
Indicator Function
Childproof lock
™‚
‹ Off.*
On.
‚
Audible signals
™ƒ
Most signals deactivated.
‹
Some signals deactivated.
‚
All signals activated.*
ƒ
Automatic timer
™†
Switched off.*
‹
- Automatic shut-off time
‚ ŠŠ
Duration of the time program function warning signal
™‡
10 seconds*.
‚
30 seconds.
ƒ
1 minute.
„
Power-Management function
™ˆ
= Deactivated.*
‹
= 1,000 W. minimum power.
‚
. = 1,500 W.
‚
= 2,000 W.
ƒ
etc.
Š or Š . = hob maximum power.
Return to default settings
™‹
Personal settings.*
‹
Return to factory settings.
‚
* Factory settings
22
symbol or the main switch.
"
and
" ‰
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).