Wiseup BC186 Guia Del Usuario página 4

the bulb camera is switched on, both blue and red indicator lights will come on and stay illumi-
nated for 5 seconds, then the red one will turn off while the blue one will stay illuminated. The
camera will enter into motion detection recording mode.
4.2.2. The camera will record a 2-minute video automatically when motion is detected. The blue
indicator light will keep flashing.
4.2.3. Press the Recording Button once to exit motion detection recording mode. Both red and
blue indicator lights will stay illuminated, indicating the camera is back to standby mode.
4.2.4. If the camera is in standby mode without any operation more than 30 seconds, both blue
and red indicator lights will flash once and stay illuminated for 10 seconds, then the red one will
turn off while the blue one will keep flashing. The camera has started motion detection record-
ing again.
V. Video File Uploads
5.1. Power off the camera, remove the Micro SD card then insert it into a card reader.
5.2. Insert the card reader into a proper PC computer USB port.
5.3. The Micro SD card will be recognized as a removable disk drive.
5.4. All the files can be accessed in the drive.
VI. Resetting
If for any reason, the camera stops responding or isn't working properly, a quick reset will
restore it back to normal operation.
Operation: When the camera is powered on, use a pin to press the Reset Button once; the
blue and red indicator lights will be illuminated for 5 seconds, then the red one will turn off while
the blue one will keep flashing. Now you can restart the camera with the factory default set-
tings.