Start Button; Stop Button - Stalgast 801350 Instrucciones De Uso

6.4. Electronic elements
1. Control panel
Display 1
2. Button functions

Start button

Set button
Down arrow
Up arrow

Stop button

3. Displays
- display 1 – indicates the rinsing and sanitization temperature; washing cycle length C1 – C2 – C3.
- display 2 – indicates the washing temperature.
4. Parameter setting
After the fi rst pressing of
the data on display 2 into:
Display 2
the display will show
. This is the factory-set password.
- 33 -
Dishwasher activation
Dishwasher deactivation
- turns the device on
- Pressing the button with the door open, launches the
STOP function. You can then close the door without starting
the washing cycle. To turn the function off, press the button
again
- confi rmation of the introduced input data, setting of the
password
- access to data setting: P1, P2, P3, P4, P5, P6
- reduces the washing or rinsing temperature
- drain pump (optional)
- increases the washing or rinsing temperature and increases
the duration of the wash or rinse cycle. C1-90 sec. C2-120
sec. C3-180 sec.
- turns the device off (does not disconnect the device from
power supply, the complete disconnection of the device
occurs after the plug is removed from the socket or the main
external switch is turned off), stops the washing and rinsing
process
. Use the arrows to change