Fujitsu S4-0812 Guia Del Usuario página 25

a. The Existing Cascaded Switches field contains all the current cascade
switch types defined in the database. Click Add, Delete, or Modify to
alter the list.
b. Associate the applicable cascaded switch types from the pull-down
menus for each adapter cable that has a cascaded switch attached.
6. When you reach the final page of the Wizard, click Finish to exit the Wizard
and return to the main window. The switch is now included in the Unit list.
To manually add a new switch with no assigned IP address, complete the
following steps:
1. Complete one of the following steps:
• Select File-New-Appliance from the Explorer menu
• Click the New Appliance button.
The New Appliance Wizard opens. Click Next.
2. Click No to indicate that the switch does not have an assigned IP address,
then click Next.
3. The Network Address window opens. Type the IP address, subnet mask (if
using IPv4 mode) or prefix length (if using IPv6 mode), and gateway you
wish to assign to the unit and click Next.
4. The software searches for any switches that do not have assigned IP
addresses. Select the unit to add from the list of new switches that were
found and then click Next.
5. The Configuring Appliance window indicates whether the IP information was
configured. If the configuration is complete, the software searches for the
new switch. Click Next.
The software also searches for all adapter cables and target device
names associated with the switch.
The Enter Cascade Switch Information window opens if the software
detects an attached cascade switch. This window contains a list of all
ports and adapter cable eIDs retrieved from the switch and the cascade
switch types to which they are connected, if any.
a. The Existing Cascaded Switches field contains all the current cascade
switch types defined in the database. Click Add, Delete, or Modify to
alter the list.
590-1059-640A
All manuals and user guides at all-guides.com
3.4 Adding a switch
19