Replacing The Halogen Lamp; Replacing The Mains Cable; Disposal - Uni MS 1000 W Manual De Instrucciones

1 Open the safety cover
- See Chapter 7.1
2 Remove the safety glass
- At one of the retaining pins located
on the side, carefully insert a
screwdriver between the safety glass
and the cover.
- Lift the safety glass up and over the
retaining pin and remove it to the
side.
Fig. 3: Remove the safety glass
3 Insert new safety glass
- Push the safety glass under one of
the retaining pins located on the side
and press it under the retaining pin
on the other side.
- Close the safety cover and tighten
the screws making sure the seal sits
correctly.

9.3. Replacing the halogen lamp

CAUTION:
Do not touch halogen lamps with bare
hands.
WARNING: Risk to life and limb
from electric shock
Disconnect the earthed plug from the
mains socket before all cleaning or
servicing work.
WARNING: Risk of burning
Allow the portable spotlight to cool off for
at least 20 minutes after switching off.
Only then may it be touched.
1 Open the safety cover
- See Chapter 7.1
GB - Instruction manual
Portable spotlight 1000 W

9.4. Replacing the mains cable

from electric shock
• Damaged mains cable
If damaged, the mains cable on the
portable spotlight must be replaced by the
manufacturer, by a manufacturer's service
technician or by a comparably qualified
person.

10. Disposal

and the packaging material is made from
environmentally friendly materials and can
be 100 % recycled.
of the device in an environmentally-
friendly and correct manner.
Version: Portable spotlight-GB-10-2011_rev.1
7
2 Remove the old halogen lamp
3 Insert the new halogen lamp
- Take the halogen lamp out of its
packaging. Do not touch the halogen
lamp under any circumstances with
bare hands. Use a cloth or
something similar to hold the
halogen lamp.
- First insert one side of the halogen
lamp into the socket. When doing so
the pin will be pressed inwards.
- Then insert the other side of the
halogen lamp into the socket.
- Close the safety cover and tighten
the screws making sure the seal sits
correctly.
WARNING: Risk to life and limb
INFORMATION: The packaging
It is not permissible to dispose
of the product with normal
household waste at the end of
its service life. Ask your local
authorities where to dispose
# 16