Troubleshooting/Faqs - Wiseup C6000 Guia Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 36
VI. SETTING TIME ON THE CAMERA
>>
Before setting time, remove the white insulating film from the end of the
battery.
1. Press the Time Setting Button once and use the UP or DOWN Button to
adjust the current hour.
2. Press the Time Setting Button again to adjust the current minute.
3. Press the Time Setting Button to save the setting.
[Note]:
While the current time is shown on the LCD Display, press the UP Button to
switch to 12-hour or 24-hour format.
VII. CHARGING
1. Remove the white insulating film from the end of the battery and slide the
power switch on the camera to the ON position.
2. Connect the camera to an outlet power socket by using the DC5V charging
adapter provided.
3. The charging indicator light will glow solid red during the charging process.
4. When camera is fully charged, the charging indicator light will stay on red.
5. It will take up to 3 hours to obtain a full charge.
VIII. TROUBLESHOOTING/FAQS
Q: My camera's battery won't hold a charge.
A: Make sure that the white insulating film is removed from the end of the
battery.
Q: The remote control won't work properly.
A: Make sure that the camera's power switch is at "ON" position and the
insulating film is removed from the remote control.
Tabla de contenido
loading

Tabla de contenido