Uline H-4862 Instrucciones De Montaje página 2

PAGE 2 OF 9
ASSEMBLY CONTINUED
C
Figure 2
C
Figure 3
D
Figure 4
E
Figure 5
2. Connect the two upright post assemblies by inserting
front/back supports (C) at the bottom of the upright
posts. (See Figure 2)
NOTE: Be sure the supports are fully seated before
continuing with assembly.
3. Connect the top of the two upright post assemblies by
inserting one front/back support (C). (See Figure 3)
NOTE: It is important that one front/back support
be temporarily left off in order to later insert the
second from the top shelf.
4. Attach shelf support (D) at bottom level by placing the
keyhole slots (on shelf support) over the rivets (on front/
back support) and tapping them into place.
(See Figure 4)
Recommended number of shelf supports per shelf are as
follows:
• 36" / 48" / 60" W − 1 Shelf Support
• 72" W − 2 Shelf Supports
5. Lay the bottom steel shelf (E) on the shelf support so
that the front and back edges overlap the front/back
supports. (See Figure 5)
0321 IH-3120