Uline H-6191 Manual Del Usuario

PALLET RACKS
TOOL NEEDED
Rubber Mallet (Optional)
Two Person Assembly (Optional)
PAGE 1 OF 6
1-800-295-5510
uline.com
Upright x 2
(Add-On Unit – Upright x 1)
ASSEMBLY FOR STARTER UNIT
Figure 1
Piston
Lock
Figure 1a
Figure 2
PARTS
Beam x 4
1. Lean upright against a wall or assemble with another
person. (See Figure 1)
2. Attach the beams by locking them into the holes on
the face of the upright. (See Figure 1)
NOTE: Push the beam down until the piston lock
clicks into place. (See Figure 1a)
3. Holding the assembled upright and beam in place,
carefully position the second upright and lock the
beam into the upright. (See Figure 2)
NOTE: Be sure the beam is locked into both
uprights at the same height before continuing
with assembly.
4. Lock the remaining beams into the uprights at the
desired heights.
NOTE: Two beams are required per level.
Para Español, vea páginas 3-4.
Pour le français, consulter les page 5-6.
0621 IH-5715