HP Smart Tank 710 Serie Guía De Referencia página 4

Install printheads
1. Lift the ink access door and wait for the
carriage to move to center and stop.
2. Press the blue button to open the
printhead cover.
3. Remove and discard the orange guard.
Handle carefully to avoid ink stains.
4. Remove the orange cap and protective
tape on both printheads.
Caution: Do not touch the electric
contacts or print nozzles under the tape.
5. Insert the printheads and click into place.
6. Close the printhead cover and the ink
access door.
1
3
4
5
6
2