Activar/Desactivar Comandos - Ovislink AirLive AirMax5 Manual De Usuario

6.5 Activar/Desactivar comandos

Configuración para activar o desactivar los comandos
( enable/disable ): <enable | disable> upnp
Propósito: activa o desativa UPnP
Ejemplo:
Command>enable upnp
(Upnp)descDocName: BD.xml
UPnP Daemon: Intializing UPnP with descDocUrl=http://192.168.1.1:80/BD.xml
UPnP Daemon: ipaddress=192.168.1.1 port=80
UPnP Daemon: conf_dir_path=/var/upnp
Initializing UPnP SDK ...
UPnP SDK Successfully Initialized.
Setting the Web Server Root Directory to /var/upnp
Succesfully set the Web Server Root Directory.
UpnpGetServerPort(): 49152
Registering the root device with descDocUrl http://192.168.1.1:49152/BD.xml
IGD root device successfully registered.
Advertisements Sent. Listening for requests ...
Command> disable upnp
Shutting down on signal 15...
UPnP is disabled
<enable | disable> snmp
Propósito: activa o desativa SNMP
Ejemplo:
Command> enable snmp
SNMP is enabled
Command> disable snmp
SNMP is disabled
<enable | disable> syslogd
Propósito: activa o desativa syslog
Ejemplo:
Command> enable syslogd
Invalid configuration specified.
Command> disable syslogd
Syslogd is disabled
109
AirLive AIRMAX5 User's Manual
6. Command Line Interface