Troubleshooting - Mobility ARIES TILTING Manual De Instrucciones

SEAT: Use a damp cloth to clean the upholstery. Please note that extensive use of the
wheelchair outdoors reduces the lifetime of the upholstery, due to exposure to sunlight.
Normal wear and tear from use is not covered by the warranty. The seat cover can also be
removed for more thorough washing. It is recommended to use cold water and normal mild
detergents for washing.
An authorised retailer will perform all necessary maintenance and repairs on your wheelchair,
for both the electrical and electronic parts and for the wheels and batteries. It is also a good
idea to store the wheelchair in a dry place after use.

20. TROUBLESHOOTING

Moretti wheelchairs are equipped with a device that constantly controls the electrical and
electronic system, to ensure safe and comfortable driving. If a malfunction or error occurs,
the LED with a wrench symbol flashes continuously for a specific number of times to indicate
that there is a problem when the wheelchair is switched on. The number of flashes indicates
the type of malfunction. Several suggestions on resolving the main problems you could have
with your wheelchair are provided below. To start self-diagnosis, press the ON/OFF button of
the electric wheelchair and count the number of flashes.
PROBLEM
1 - General error
2 - Battery error
3 The left motor is faulty
4 The right motor is faulty
5 The left motor is blocked
6 The right motor is blocked
7 - Joystick error
8 - Joystick power supply error
9 - Joystick connection error
10 - Unknown error
11 Incompatible control unit
Position the motor lever on N and then reposition on D.
Try switching on.
Check the battery connection cables.
Try replacing the battery.
Check the left motor and the electrical connections.
Check the right motor and the electrical connections
Check the left motor unlock lever Contact your usual
retailer
Check the right motor unlock lever Contact your usual
retailer
Check the joystick connections.
Replace the joystick
Check the joystick connections.
Replace the joystick
Check the joystick connections.
Replace the joystick
Check all the cables and connections.
Contact your usual retailer
Control unit. The joystick is not recognised by the
system. Check the connections
Contact your usual retailer
SOLUTION
19