UK Plug Replacement
WARNING
Read these safety instructions thoroughly before connecting this
product to the mains supply.
Before switching on make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate. This product is designed to operate on
220-240 V~. Connecting it to any other power source may cause damage.
This product may be fitted with a non-rewireable plug. If it is necessary to change
the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or
damaged, the plug must not be used until a suitable replacement is obtained.
If the plug has to be changed because it is not suitable for your socket, or due to
damage, it should be cut off and a replacement fitted, following the wiring instructions
shown below. The old plug must be disposed of safely, as insertion into a 13 A socket
could cause an electric hazard.
The wires in the power cable of this product are coloured in accordance with the
following code:
The product is protected by a 13 A approved (BS 1362) fuse.
If the colours of the wires in the power cable of this product do not correspond with
the markings on the terminals of your plug, proceed as follows.
The wire which is coloured Blue must be connected to the terminal which is marked
N or coloured Black. The wire which is coloured Brown must be connected to the
terminal which is marked L or coloured Red.
Plug should be BS 1363/A approved fit a 13 A fuse
Neutral (blue)
The outer sheath of the cable should be firmly held by the clamp
A. Blue = Neutral B. Brown = Live
E
L
N
Live (brown)
11