Air Conditioner Operation - Glw 161 Controller; Cooling Mode; Ventilation Mode - Spheros CC-140 Manual Del Propietário

Operation
2.2 - AIR CONTIDITONER OPERATION - GLW161 CONTROLLER
When the ignition key is turned, the display will first show the controller's software
version, right after, the internal temperature of the vehicle. Before the start the
display will show the initials AL (see item 2.2.4).
4
1 – Numeric Display
2 – Ventilation control key (VENT.)
3 – Cooling control key (REFRIG.)
4 – Key (INCREASE)
5 – Key (DECREASE)
6 - Indicator "cooling mode"
7 - Indicator "automatic mode"
8 - Indicator "ventilation mode low velocity"
9 - Indicator "ventilation mode high velocity"
8
7
9
6
1
2
3
5

2.2.1 - COOLING MODE

1 – To turn the equipment on, press the key (REFRIG).
The "cooling mode" will be automatically on according to the internal tem-
perature of the vehicle and the set temperature.
The cooling mode operation will be shown according to the described
below:
a) Indicator (7) turned off informs that the "cooling mode" is off
b) Indicator (7) blinking informs that the equipment is running on "ventila-
tion
mode"
c) Indicator (7) turned on informs that the "cooling mode" is on.
2 – To shut the "cooling mode " press once again the key (REFRIG)
Whenever the systems initiates on "cooling mode" the evaporator's blowers
will start on "automatic mode". However, the ventilation velocities may be
changed manually (see item 2.3.2).
The evaporator's blowers are activated, in the automatic mode, according
to the set-point programming.

2.2.2 - VENTILATION MODE

The "ventilation mode" provides two operation velocities:
1 – with the "cooling mode" shut, press the key (VENT) and the air conditioner
will work only on ventilation.
The indicator (9) will be on to inform that the ventilation is working at low
velocity.
2 – to have the blowers working at high velocity, press (VENT) key again.
This function will be informed by having indicator (10) on.
24