Step 5 - Testing And Getting To Know Your Monitor - Angelcare AC605-2PU Manual Del Propietário

STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR

5.1 - SENSOR PAD
TO TEST THE SENSOR PAD:
1
MOTION ALARM
• If NO movement is detected after 15 seconds you will hear a single 'TIC' pre‑alarm
sound from the Nursery Unit.
• If after a further 5 seconds there is still NO movement detected both the Parent Unit
and Nursery Unit speakers will emit a loud warning sound.
• Green light on the Nursery Unit will turn off to indicate
NO movement is being detected.
IF THE ALARM DOES NOT SOUND
• Avoid contact with crib while Sensor Pad is in operation.
• Place crib near a supporting wall.
• Adjust the Sensor Pad sensitivity level.
TO STOP THE ALARM
01mf5_Manuel_NA_AC605_12003.indd 15
2
OR
Place your hand
back on the
mattress.
1) Move your hand lightly on the mattress.
The Nursery Unit Movement
Indicator will flash continuously.
2) Remove your hand from the mattress.
After 15 seconds you will hear a 'TIC'
pre‑alarm sound, and 5 seconds later
the Movement Alarm will trigger.
3) Repeat by moving your hand lightly in
all four corners of the mattress. Ensure
the Nursery Unit Movement Indicator is
still flashing.
Shut the Nursery
Unit OFF
E
N
15
2014-04-17 2:13 PM