Electrical Connection; Utilization Instructions; Maintenance; Technical Specifications - Kunft KQH-2702 Manual De Instrucciones

2.2. Electrical connection

Before connecting the appliance, make sure that the specifications
on the data plate correspond to the conditions of the electrical supply
network.
The electrical safety of this appliance can only be assured if it has
been correctly grounded.
WARNING: This appliance must be earthed.
IMPORTANT: During the assembly is important to be especially
careful not to touch the heating elements with your hands as this
could leave spots which would diminish the thermal radiation.

2.3. utilization Instructions

In order to turn the appliance on, turn on the switch.
0=off 1=600W; 2=1200W;
If you notice while turning on the appliance that there are slight
vibrations which then gradually fade away, don't become unduly
alarmed this is part of the normal behavior of the appliance.

3. MaINtENaNcE

This appliance does not require any particular maintenance.
Before undertaking any maintenance operation, disconnect the
appliance from the power supply.
In case of breakdown and/or poor function of the appliance,
disconnect the appliance from the power supply and contact an
authorized service center. always request the use of original spare
parts.
The non-observation of these instructions can compromise the safety
of the appliance and render guaranty invalid.

4. tEcHNIcal SPEcIfIcatIoNS

Aqueced-Quartz-KQH-2702-Manual-2.indd 9
radiant
heater
Model Input Voltage
KQH-2702 220-240v ac
KQH-2702
Rated Input
frequency (Hz)
Power
1200W
9
EN
Rated
50/60Hz
16/06/20 18:10