AmazonBasics B010QZCT5W Instrucciones De Montaje página 13

Step 7: Adjust your wall mount arm's tension.
You can adjust the vertical, tilt, and arm tension so that the monitor stays in place when you move it.
Adjusting the vertical tension
Tilt the monitor down to access the screw. If the monitor is rising up, loosen the screw by
turning it to the left. If the monitor is falling down, tighten the screw by turning it to the right.
Adjusting the tilt tension
If the monitor is falling forward (screen goes down), loosen the screw by turning it to the left. If
the monitor is falling back (screen goes up), tighten the screw by turning it to the right.
Caution: Do not over-tighten the screw. You might damage the
monitor or your wall mount arm.
Caution: Do not remove the screw. The monitor might fall.
Do not over-tighten the screw. You might damage the monitor or
your wall mount arm.
13