english
9 Disposal / Recycling
Electrical and electronic old
devices contain a variety of valu-
able materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
10 Technical data
Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Weight
Power consumption
with max. number of sheets
Sound pressure level emissions
(Idle running / load)
Intake width
Cutting speed
Power supply
Operating mode
Operating time
Idle time
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
EU declaration of conformity
Product: Document shredder
Machine type:
The manufacturer, HSM GmbH + Co. KG, Austraße 1 - 9, 88699 Frickingen / Germany, hereby declares under its sole responsibility
that the products described above comply with the applicable harmonisation legislation of the European Union:
Low Voltage directive 2014/35/EU, EMC directive 2014/30/EU, RoHS directive 2011/65/EU
Related standards:
▪ EN 55014-1:2006 +A1:2009 +A2:2011
▪ EN 61000-3-2:2006 +A1:2009 +A2:2009
▪ EN 62233:2008
▪ EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +AC:2011 +A2:2013
Signed for and on behalf of: HSM GmbH + Co. KG
Frickingen, 21.4.2016
12
70 g/m
2
80 g/m
2
H
ppa. Hubert Kötzinger - Chief Technical Offi cer (CTO)
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
Strip cut
3.9
P-2, T-2, E-2
12 - 14
10 - 12
4.0 kg
300 W
58-60 dB(A) / 63-64 dB(A)
215 - 240 V, 50 - 60 Hz
Brief operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
366 x 258 x 455
▪ EN 55014-2:1997 +A1:2001 +A2:2008
▪ EN 61000-3-3:2013
H
Cross cut
4 x 25
P-4, T-4, E-3, F-1
6 - 7
5 - 6
4.5 kg
120 W
52-53 dB(A) / 60-63 dB(A)
225 mm
44 mm/s
3 min
30 min
20 l
05/2016