Other Functions - Gewiss GW 90 749 Manual Del Usuario

BLOCKAGE FUNCTION
- Parameterisation of blockage activation value, behaviour with blockage activated, and
behaviour upon deactivation of blockage
- Setting of blockage object value on download and on resetting of BUS voltage
SLAVE MODE FOR CONTROLLING FROM DEVICE ON BUS
- Setting of monitoring time, dimmer behaviour in safety
- Parameterisation of Slave mode value on download and on resetting BUS voltage
LOGIC FUNCTION
- AND/NAND/OR/NOR logic operation with command object and object resulting from logic
function
- AND/NAND/OR/NOR/XOR/XNOR logic operations up to 4 logic inputs
- Setting of NOT operation on the 4 inputs
For all the command objects, it is possible to set:
- the mode to reach the required light intensity (via ramp or jump to value)
- the parameterisation of the ramp adjustment speed 0% - 100%
- the setting of switch on/off delay

OTHER FUNCTIONS

- parameterisation of output behaviour with BUS voltage fall/reset
- setting of ON/OFF status information transmission and percentage value of current light
intensity
- overcharge setting status information
- setting of 230V voltage absence information transmission (with BUS voltage present)
- Setting of local button key function
OFF
Green
Red
Flashing yellow
Flashing red
GENER L DESCRIPTION
Status of output status indication LED
Load not piloted (OFF or adjustment value 0%)
Load piloted (ON or adjustment value ≠ 0%)
Output overload
Absence of 230V AC with presence of BUS power supply
Reset following overload (5 sec)
16