Operation (continued)
5
Adjusting the ON-TIME Switch
on the Motion Sensor
The "ON-TIME" switch determines the amount of time
the light will stay on full bright after all motion has
stopped.
Set the "ON-TIME" switch to the 1 or 5 minute
position.
ON-TIME
(MINUTES)
5
1
TEST
Care and Cleaning
To prolong the original appearance, unplug or remove the batteries and clean with a soft, lightly dampened
cloth only.
Do not use paints, solvents, or other chemicals on these products. They could cause a premature deterioration
of the nish. This is not a defect in the nish and will not be covered by the warranty.
Do not spray with a hose or power washer.
All manuals and user guides at all-guides.com
6
The "DETECT" switch determines what time of the
day the motion sensor (A) will turn the light ON when
motion is detected. The "DETECT" switch is located in
the battery compartment. Remove the batteries to set
this switch.
A
NIGHT
7
Adjusting the DETECT Switch
on the Motion Sensor
Set the "DETECT" switch to NIGHT ONLY or
DAY/NIGHT (24 hour operation).
DAY
NIGHT
A
ONLY
DETECT
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.com