Beper 40.926 Manual De Instrucciones página 8

Ionic Straightening Brush Use instructions
Description of the product Fig. A
1. High-temperature resistant shell
2. Thermally insulated outer bristles
3. Heating surface
4. Thick metal heating bristles
5. Thermally insulated bristles heads
6. ON/OFF button
7. + button
8. - button
Connect the appliance to the main socket. Turn the appliance on by pressing the ON/OFF button for a few se-
conds, until the display lights up.
Press the + or – buttons to select the desired working temperature; it is advisable to set the appliance at the
highest temperature at first, in order for it to heat up properly, and then to decrease temperature based on the
amount and type of hair to be styled. For thicker hair, recommended working temperature is 200-230°C; for all
hair types, recommended working temperature is 150-200°C; for thin hair, recommended working temperature
is 80-150°C
After the appliance has been switched on and the temperature set, wait a few minutes until the selected tempe-
rature is shown on the display, and then start using the brush to style your hair as desired.
Turn the appliance off by pressing the ON/OFF button for a few seconds until the display shuts off.
Remove the plug from the socket when not in use, and wait until it has completely cooled down before storing it.
Cleaning and maintenance
Unplug the brush from the main socket and wait for it to cool down before performing any cleaning operation.
Gently remove hair and dust by hand, making sure not to damage the bristles heads; use a soft cloth to wipe dust
and dirt from the outer case and the display.
Warning: do not immerse the appliance and/or its power cord in water or any other liquid
Technical data
Power: 55W
110-240V~50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected.
8