Technical Data - Hansgrohe Talis Classic 14140 Serie Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
Assembly
Attention! The fitting must be installed, flushed and
tested after the valid norms.
1. Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
The hot and cold water supply's should be of equal
pressures.

Technical Data

Operating pressure:
Recommended operating pressure: 0.1 - 0.5 MPa
Test pressure:
(1 MPa = 10 bars = 147 PSI)
Hot water temperature:
Recommended hot water temp.: 65° C
Centre distance:
Connections G ½":
Rate of flow:
Anti-pollution function
To adjust the hot water limiter on single lever
mixers, please see page 14.
No adjustment is necessary when using a continuous
flow water heater.
Hansgrohe single lever mixers can be used toge-
ther with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0.15 MPa.
Fault
Insufficient water
Mixer stiff
Mixer dripping
Hot water temperature too low
Instantaneous heater didn't work - Flow limiter in handshower isn't
English
max. 1 MPa
1.6 MPa
max. 80° C
150 ± 12 mm
cold right - hot left
approx. 18 l/min
Cause
- Shower filter seal dirty
- Non return valve hasn't moved
back
- Cartridge defective, calcified
- Cartridge defective
- Hot water limiter incorrectly set
removed
- Filter are dirty
- Non return valve didn't move back
Attention!
The non return valves must be checked regularly ac-
cording to DIN EN 1717 in accordance with national
or regional regulations (at least once a year).
Spare parts (see page 4)
1
handle
1.1 screw cover
2
flange
3
nut
4
cartridge cpl.
5
flange
6
S-unions
7
aerator cpl.
8
selector assy
9
diverter knob
10 non return valve DW 15
11 noise reduction
12 sleeve
13 seal
14 non return valve
XXX = Colors
000 chrome plated
820 brushed nickel
Remedy
- Clean filter seal between shower
and hose
- Exchange non return valves
- Exchange cartridge
- Exchange cartridge
- Set hot water limiter
- Remove flow limiter
- Clean the filter / exchange filter
- Exchange non return valves
14193XXX
96338000
97406XXX
97209000
92730000
96346XXX
94140000
13914XXX
97978000
97981XXX
94074000
96429000
97979XXX
95008000
97980000

Tabla de contenido
loading

Tabla de contenido