Trust GXT 31 Manual Del Usuario página 4

GXT 31 Gaming Mouse - USER'S MANUAL
Mouse layout
- Button 1 (left mouse button)
a
- Scroll wheel
b
Button 3 default function = middle click
Button 8 default function = tilt left
Button 9 default function = tilt right
Button 10 default function = scroll up
Button 11 default function = scroll down
c
- Button 2 (default function = right mouse click)
d
- Multipurpose LED indicator
e
- DPI LED indicator
f
- Button 4 (default function = page forward)
g
- Button 5 (default function = page backward)
h
- DPI switch
i
- Button 6 (default function = none)
j
- Button 7 (default function = none)
k
- Function button (see 'advanced configuration' for explanation)
l
- Mode button (click to switch between 'Profile-1,2,3,4 and 5')
m
- Cable release button
n
- USB connection
o
- Link button
p
- on/off switch
q
- Battery compartment
Installation
a. - Insert the Trust CD-ROM into your CD drive.
b. - Click "Run Setup.exe – Published by Trust International BV".
- Click "Install driver".
c. - Click 'close' when the installation is completed.
a. - Connect the USB cable to the mouse and power on the mouse.
b. - Connect the USB dongle to the USB port of the PC.
- Connect the mouse to the USB port of the PC.
c. - Wait until the message 'Your device is ready to use' appears.
- Start the mouse configuration software (located in the taskbar).
- You can now start to configure the mouse.
- After configuring the mouse, keep the USB cable connected to fully charge the battery.
The mouse needs to be charged for 4 hours before you can use it wirelessly.
- battery status
- DPI setting
- scroll acceleration
2