Displays Error Code On The Control Screen - Decathlon ORIGINAL 920E Manual Del Usuario

w

DISPLAYS ERROR CODE ON THE CONTROL SCREEN

Error code
16 / 17
Abnormal voltage in the
torque sensor
32 / 33
Motor fault
48 Speed sensor fault in the
motor.
49
Cadence sensor malfunction
For more information on use, maintenance, after-sales services or in
case of questions, visit DECATHLON's support website: www.support-
decathlon.com or visit a DECATHLON store.
If the bike or battery suffers a fall, check that your battery is intact.
Caution: the watertightness of your battery is no longer guaranteed
following a fall.
Prohibited: cleaning using a high-pressure jet.
Not recommended: cleaning under running water.
Recommended: cleaning using a damp sponge.
The rims are subject to wear which must be checked to ensure they are
intact.
The motorised wheel is also subject to higher stress than a standard
bike wheel, and although it is reinforced, it is possible that spokes may
break. If a spoke breaks, contact your DECATHLON store.
Definition
Turn off the bike and remove the battery. Replace the
battery and turn on the bike. If the fault has not disap-
peared, go to a Decathlon workshop for repair.
Check the positioning and condition of the motor connec-
tors. If the fault has not disappeared, go to a Decathlon
workshop for repair.
Visit a Decathlon store for possible motor diagnostics
Turn off the bike and remove the battery. Replace the
battery and turn the bike back on. If the fault has not
disappeared, go to a Decathlon workshop for repair.
18
Solutions